Reseller Zone Knowledgebase BroadbandConnect Hardware Configuration Manual Settings for all Modems using VDSL (for NBN)

Manual Settings for all Modems using VDSL (for NBN)

Print
0

 

Port:     DSL

Connection Type:     PPPoE

Priority:     0

VLAN ID:     100

Username:     username@nbnconnect.net.au

Password:     your customer's nbnconnect password

Authentication Method:     AUTO

IPv4 Address:     Static     (enter your static IP address in the available field)

Obtain DNS:     Automatically

If manual DNS entries are required by your modem, use:

Primary:     103.5.90.253
Secondary:     103.5.91.253

MTU:     1492

 

NOTE: If your modem/router has ALG (application layer gateway) features, please ensure that you disable both the SIP ALG and the h.323 ALG because these will cause problems if you're planning to use VoIP.

 

 

Was this answer helpful?

Still stuck?

Send us the details and our team will take it from here

Open a Support Ticket